Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

When applied as quartz primer, Bucciato E must be diluted with 30% of water and stirred thoroughly. Apply with a wide brush, according to the direction of the decorative coat to be created. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Stir Calce Marmorino thoroughly before use. Apply and distribute an appropriate amount evenly using a metal trowel to a small area. Press the tool against the surface of a fresh coat and trowel horizontally in a chosen direction to produce an irregular texture. Depending on the temperature, smooth the surface before it dries with an INOX trowel, holding it flat against the surface. The work should be performed in stages, applying the compound to small areas until the whole surface is covered.

Lumicca Incolore primes and preserves the substrate. Before commencing work, dilute 1:1, max. 1:1.5 with water and stir thoroughly. Apply with a wide brush and distribute with euromal evenly, according to the direction of previously created pattern. Remove excessive preservative using a cotton cloth, in particular from pits. The work should be performed in stages until the whole surface is covered.

Transparent Lumicca Base in an appropriate colour can be applied to emphasise the texture of decorative effects. Usually, it is an optional product, selected according to the desired finish. Before commencing work, it must be diluted with 30 – 50% of water and stirred thoroughly. Apply with a paint brush or euromal, removing excessive paint with a cotton cloth. Distribute according to the direction of previously applied pattern. Depending on the desired effect, apply one or more colours to a small area or the whole surface. Lumicca Base provides additional preservation to improve resistance.

Travertine effect which can be created on natural, ecological Calce Marmorino plaster. It is applied in a single layer, allowing us to work on it for more time on larger surfaces. The substrate does not require special levelling or application of putty. A thick layer of the product can be applied directly to cement-lime and machine-applied plasters, and to virtually any kind of plaster as it adheres very well to various substrates, covering slightly uneven surfaces.