Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

When applied as quartz primer, Bucciato E must be diluted with 30% of water and stirred thoroughly. Apply with a wide brush, according to the direction of the decorative coat to be created. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Stir Calce Marmorino thoroughly before use. Apply and distribute an appropriate amount evenly using a metal trowel to a small area. Press the tool against the surface of a fresh coat and trowel vertically and horizontally (alternatingly) to produce an irregular texture. Smooth the drying surface slightly and scratch the pattern using a sharp tool. Depending on the temperature, smooth the surface before it dries with an INOX trowel, holding it flat against the surface. The work should be performed in stages, applying the compound to small areas until the whole surface is covered.

Lumicca Incolore primes and preserves the substrate. Before commencing work, dilute 1:1, max. 1:1.5 with water and stir thoroughly. Apply with a wide brush and distribute with euromal evenly, according to the direction of previously created pattern. Remove excessive preservative using a cotton cloth, in particular from pits. The work should be performed in stages until the whole surface is covered.

Apply Cromo to create the finish. Before applying, it must be diluted with 50 – 80% of water and stirred thoroughly. Apply Cromo to euromal with a paint brush. Then apply to the substrate, working it into the substrate in a proper direction. The work should be performed in stages until the whole surface is covered. This coat provides a pearlescent afterglow.

Decorative effect for interiors, soft to touch. It can be created on Calce Marmorino decorative plaster applied in crossed travertine pattern and wiped slightly with Cromo Grey paint. When it dries, the combination of effects creates unique textures and pearlescent reflections. It can be used to decorate various interiors, ranging from classic elegant to modernist interiors, in public facilities and private flats. It provides interiors with original appearance and style – they become modern and vivid. Cromo can be used to create the desired atmosphere in interiors, making them luxurious, unique, bright, with a silky glow.