Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

When applied as quartz primer, Bucciato E must be diluted with 30% of water and stirred thoroughly. Apply with a wide brush, according to the direction of the decorative coat to be created. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Stir Calce Marmorino thoroughly before applying each layer. Distribute a base layer of plaster with an INOX trowel, creating a grain–thick layer and smoothing out with a trowel, pressing it flat against the substrate. The work should be performed in stages until the whole surface is covered.

Using a large INOX trowel, apply horizontal grain–thick layers of the compound to a drying substrate. Before it dries completely, scratch the surface with a sharp tool to produce a travertine pattern. The work should be performed in stages so that the layers bind while wet. After scratching, smooth out the surface, holding the trowel at a small angle.

Lumicca Incolore primes and preserves the substrate. Before commencing work, dilute 1:1, max. 1:1.5 with water and stir thoroughly. Apply with a wide brush and distribute with euromal evenly, according to the direction of previously created pattern. Remove excessive preservative using a cotton cloth, in particular from pits. The work should be performed in stages until the whole surface is covered.

Transparent Lumicca Base in an appropriate colour can be applied to emphasise the texture of decorative effects. Usually, it is an optional product, selected according to the desired finish. Before commencing work, it must be diluted with 30 – 50% of water and stirred thoroughly. Apply with a paint brush or euromal, removing excessive paint with a cotton cloth. Distribute according to the direction of previously applied pattern. Depending on the desired effect, apply one or more colours to a small area or the whole surface. Lumicca Base provides additional preservation to improve resistance.

Ecological and easy to apply travertine effect, characterised by smooth, horizontal patterns forming so called "pits". Its natural colour is frequently used to design interiors as it reflects an original travertine effect and goes well with other elements of the interior, such as glass, stones, ceramics, wood, or metal. The substrate does not require special levelling or application of putty. Can be applied directly to cement-lime and machine-applied plasters, and to virtually any kind of plaster as it adheres very well to various substrates, levelling slightly uneven surfaces. The surface is highly resistant to washing and scrubbing, the natural components provide excellent water vapour permeability and prevent fungi and moulds from growing.