Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:4 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

MFA WHITE – white primer, can be pigmented. Recommended before painting to make the substrate uniform, in particular when applying a new colour to walls. Intended for intense colours of low covering properties. Dilute with max. 100% of water, apply with a wide brush, working it well into the substrate. Can be applied using a roller without diluting as internal paint or priming base.

Apply the first layer of paint (diluted with 5 – 15% of water, depending on the base colour) to a well–prepared substrate. First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Before painting, level the surface by polishing with sandpaper in order to make the surface smooth and perform any necessary touch–up. Apply the first layer of paint (diluted with 5 – 15% of water, depending on the base colour) to a well–prepared substrate. First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Apply the second layer of paint (diluted with 5 – 15% of water, depending on the base colour). First, paint areas unavailable to a large roller (as per the first layer). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.