Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:4 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

MFA WHITE – white primer, can be pigmented. Recommended before painting to make the substrate uniform, in particular when applying a new colour to walls. Intended for intense colours of low covering properties. Dilute with max. 100% of water, apply with a wide brush, working it well into the substrate. Can be applied using a roller without diluting as internal paint or priming base.

Apply the first layer of paint (diluted with 5 – 15% of water, depending on the base colour) to a well–prepared substrate. First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Apply the second layer of paint (diluted with 5 – 15% of water, depending on the base colour). First, paint areas unavailable to a large roller (as per the first layer). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Use Lumicca Pearl or Gold to create an effect of wood rings. Apply paint with a paint brush to the wall and use Legnato rubber stamp to create the texture. Apply stripes in stages, alternating the movement of the tool. The work should be performed in cycles until the whole surface is covered.

Original effect produced with Lumicca Pearl decorative paint, using a rubber tool to create tree rings. The effect resembles natural wood. Available also with a golden, silver, and pearlescent afterglow, it can provide original and practical finish for walls, doors, shelves, and furniture, changing them beyond recognition. Easy to apply and maintain, resistant to dirt and dust despite its irregular texture, can be cleaned with a damp cloth. Goes well with natural wood, metal, and other ECORSON products.