Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:4 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

MFA WHITE – white primer, can be pigmented. Recommended before painting to make the substrate uniform, in particular when applying a new colour to walls. Intended for intense colours of low covering properties. Dilute with max. 100% of water, apply with a wide brush, working it well into the substrate. Can be applied using a roller without diluting as internal paint or priming base.

Apply the first layer of paint (diluted with 0 – 10% of water, depending on the base colour) to a well–prepared substrate. First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Apply the second layer of paint (diluted with 0 – 10% of water, depending on the base colour). First, paint areas unavailable to a large roller (as per the first layer). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Impresja paint is ready to use. If necessary, thin with max. 5% of water. Apply with a paint brush in a regular, pointwise manner to a small area and distribute over the surface. Impresja is applied in stages, combining the layers until the whole surface is covered. During application, return to drying layers and brush them slightly with a wide brush so that grains in the paint form clusters and create the desired effect. If the coat is too thick, smooth the surface with a short–pile roller or a trowel, holding it flat against the surface.

New and revolutionary decorative effect produced using IMPRESJA paint. Three different base versions are available: Silver, Aluminio, and Multicolor Gold. Allows you to create various effects, different from previously available pearlescent decorations as it provides an intense afterglow even in the bottom, poorly lit parts of the walls, additionally providing a perfectly clear 3D brightening effect that "cooperates" with the lighting. Additionally, it does not require pigmenting as other decorative paint. Painting a substrate in any colour with Murillo or Fortuna, we provide a slightly lighter tone to the finish. Impresja paint is semi-opaque, thus it partly acquires the colour of the substrate.