Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:4 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

MFA WHITE – white primer, can be pigmented. Recommended before painting to make the substrate uniform, in particular when applying a new colour to walls. Intended for intense colours of low covering properties. Dilute with max. 100% of water, apply with a wide brush, working it well into the substrate. Can be applied using a roller without diluting as internal paint or priming base.

Apply the first layer of paint (diluted with 5 – 15% of water, depending on the base colour) to a well–prepared substrate. First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Apply the second layer of paint (diluted with 5 – 15% of water, depending on the base colour). First, paint areas unavailable to a large roller (as per the first layer). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Depending on the desired effect, apply one or more colours of the product. Use separate paint brushes for each colour. Apply the base colour to a small area with a wide brush and distribute evenly. Add other colour tones to wet coats, applying paint in a pointwise manner. Mix with a sponge, glove, or wide brush to produce desired colour transitions. The effect should be applied quickly so that LUMICCA binds while wet. Be careful to distribute the colours evenly. The work should be performed in stages.

Pearlescent decoration which enables you to combine any colours (such as present in the interior) to create an exquisite final effect. Prepare and paint the substrate to a selected colour, for example using Eco12, Eco13, Murillo, Fortuna, Murimal 200 and apply a layer of Lumicca Pearl pearlescent and transparent paint in a base colour with a paint brush (area of approx. 1 m.²). Apply other colours in a point-wise manner to a wet layer and distribute with a sponge, brush, or glove, alternating or combining the colours in the pattern. The effect should be applied quickly so that Lumicca Pearl binds over the whole surface. Be careful to distribute the colours evenly and maintain symmetry