Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

When applied as quartz primer, Bucciato E must be diluted with 30% of water and stirred thoroughly. Apply with a wide brush, according to the direction of the decorative coat to be created. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Ready to use when applied with a trowel, dilute with max. 5% of 5 – 8 h water, stir thoroughly. Apply a thin coat to the whole surface with a trowel, according to the direction of the decorative coat to be created. The work should be performed in stages until the whole surface is covered.

Apply a small amount of Bucciato E compound to a trowel. Press the trowel against the other trowel and pull them away several times to produce a sticking–out texture. Stamp skilfully spot by spot, applying the compound to the substrate to create a regular pattern over the whole surface. Change the way you hold the trowel frequently during application to avoid a symmetrical and uniform pattern. After a few minutes, smooth out the drying ridges. The work should be performed in stages.

Apply OXIDECOR W to wiping effect to create a corrosion effect, dilute with approx. 20% of water. The surface can be slightly polished with sandpaper before or after work. Apply paint to the substrate with a paint brush and distribute using euromal or a trowel with sponge. Remove excessive paint with a rubber scraper. Make sure that when applied, paint creates a uniform layer all over the surface. Apply a single coat or two coats in at least 5 hours intervals.

This decorative effect provides a rusty look. Can be applied to whole walls or single elements, to all kinds of indoor and outdoor surfaces, such as cement-lime plasters, gypsum-carton boards, metal, wood, plastic, etc. Perfect for creating exquisite and special atmosphere in our flats, offices, and industrial buildings. Adds a raw decorative element and a touch of the past to the interior, goes well with retro, modern, and loft styles, provides interiors with a sense of myster. Easily applied decorative effect.