Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

We recommend diluting PRIMER E quartz primer with 10 – 15% of water and applying with a wide brush, according to the direction of the desired decorative coat. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Before use, stir Calce Grassello thoroughly (manually or mechanically). Apply all layers with a professional INOX trowel. Apply a thin layer of compound, covering the whole surface in movements towards the centre of the new layer. The work should be performed in stages until the whole surface is covered.

Clear the substrate initially with a putty knife. The coat should remain matt, thus you should always have some compound on the trowel during application and distribution. Apply overlapping layers of Calce Grassello, at the same time levelling the substrate until the whole surface is covered.

Clear the substrate with a putty knife before applying the coat. Stir Velutti Magnapearl thoroughly. Using an INOX trowel (medium or large), apply a slightly excessive amount of the compound. Distribute, squeezing the excess from under the trowel to provide a uniform and symmetrical pattern. This method enables you to produce light reflections. Repeat the activity in cycles, combining the layers over the whole surface.

This decorative effect is created on a smooth substrate coated with Calce Grassello stucco by applying a single layer of Velluti Magnapearl decorative compound. Calce Grassello levels any uneven surfaces. This combination enables you to create interesting effects and bright colour transitions with velvety pearlescent and matt reflections with a golden or silver afterglow. The afterglow (golden or pearlescent) is selected for the finish based on the chosen colour and expectations, its intensity depends on the angle of the light.