Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

When applied as quartz primer, Bucciato E must be diluted with 30% of water and stirred thoroughly. Apply with a wide brush, according to the direction of the decorative coat to be created. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Stir Calce Marmorino thoroughly before applying each layer. Distribute a base layer of plaster with an INOX trowel, creating a grain–thick layer and smoothing out with a trowel, pressing it flat against the substrate. The work should be performed in stages until the whole surface is covered.

Apply horizontal layers of Calce Marmorino, leaving visible gaps. Create pits by pattering a hard brush against the surface. Approx. 20 minutes after application (depending on the temperature), smooth out the plaster with a trowel (holding it flat against the surface) before it dries. The work should be performed in stages

Lumicca Incolore primes and preserves the substrate. Before commencing work, dilute 1:1, max. 1:1.5 with water and stir thoroughly. Apply with a wide brush and distribute with euromal evenly, according to the direction of previously created pattern. Remove excessive preservative using a cotton cloth, in particular from pits. The work should be performed in stages until the whole surface is covered.

Apply Lumicca Base to emphasise the texture. Depending on the desired effect, apply one or more colours of the product. Use a new brush for each colour. Apply colours to the substrate and distribute using a rubber scraper according to the direction of previously applied texture. The work should be performed in stages.

Creates the effect of natural travertine, can be pigmented in accordance with catalogue colours, pastel, or some of the intense colours. The product dries quickly, therefore the second layer can be applied to the first, drying one. This gives us more time to work on the material, crucial while applying the plaster to large surfaces. The surface is highly resistant to washing and scrubbing, the natural components provide excellent water vapour permeability and prevent fungi and moulds from growing. Perfect for interiors exposed to water vapour and dirt, such as kitchens, bathrooms, and busy public interiors.