Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

We recommend diluting PRIMER E quartz primer with 10 – 15% of water and applying with a wide brush, according to the direction of the desired decorative coat. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Before use, stir Coccio Grassello thoroughly (manually or mechanically). Apply all layers with a professional INOX trowel. Apply a layer of compound, covering the whole surface in motions towards the centre of the new layer. Coccio Grassello contains fine grains, thus while distributing the compound, hold the trowel at a small angle and pay attention to scratches and trowel slips. Apply a layer of compound, covering the whole surface in movements towards the centre of the new layer. The work should be performed in stages until the whole surface is covered.

Clear the substrate initially with a putty knife. The coat should remain matt, thus you should always have some compound on the trowel during application and distribution. Apply overlapping layers of Coccio Grassello, at the same time levelling the substrate until the whole surface is covered.

Clear the substrate initially with a putty knife. Prepare a medium INOX trowel for application and a small one for producing gloss. Smooth out the edges of trowels using fine sandpaper as the trowels must not scratch the surface. Apply overlapping layers of stucco of similar size and remove according to the direction of new layers, squeezing excessive compound from under the trowel. After applying to a small area, smooth it out and produce gloss using a small INOX trowel while the compound is still drying. The work should be performed in stages in one go. When applying the final coat to a large area, two people should perform the work. One person applies the compound and smooths out the surface, the other one adds gloss to drying stucco.

Eco-friendly smooth decorative coating produced using natural components and additional fine-grained and dark marble particles, visible after application. Due to darker grains, it should be applied to light colours so that it is fully visible. Selected components based on slaked lime facilitate easy removal of moisture from the walls in order to prevent fungi from growing.