Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:4 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

MFA WHITE – white primer, can be pigmented. Recommended before painting to make the substrate uniform, in particular when applying a new colour to walls. Intended for intense colours of low covering properties. Dilute with max. 100% of water, apply with a wide brush, working it well into the substrate. Can be applied using a roller without diluting as internal paint or priming base.

Apply the first base layer of paint to a well–prepared substrate (diluted with 5% of water, depending on the base colour). First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Using a roller or paint brush, apply a layer of CRACLE to a prepared base layer in the colour of cracks to. The work should be performed in one go.

Dilute Eco 12 with max. 5% of water. Distribute over the substrate quickly. Cracle reacts immediately, thus pay attention to the quality while painting and avoid returning to the applied coat until application is finished.