Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

Apply the first layer of paint (diluted with 5 – 15% of water, depending on the base colour) to a well–prepared substrate. First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.

Stir Rusticon thoroughly before use. Apply and distribute an appropriate amount evenly using a metal trowel to a small area. Press the tool against the surface of a fresh coat and trowel horizontally in a chosen direction to produce an irregular texture. Depending on the temperature, smooth the surface before it dries with an INOX trowel, holding it flat against the surface. The work should be performed in stages, applying the compound to small areas until the whole surface is covered.

Apply one or two layers of paint (diluted with 5 – 15% of water, depending on the base colour) to a well–prepared substrate. First, paint areas unavailable to a large roller (internal corners, areas close to the skirting boards, power outlets, etc.). Apply paint at a uniform rate from top to bottom in one go. Make sure to evaluate the quality constantly and avoid touch–ups on the drying layer.