Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

When applied as quartz primer, Bucciato E must be diluted with 30% of water and stirred thoroughly. Apply with a wide brush, according to the direction of the decorative coat to be created. Created quartz coat will increase adhesiveness and facilitate application of further coats.

Before use, stir Grassmarmo thoroughly (manually or mechanically). Apply all layers with a professional INOX trowel. Grassmarmo contains fine grains, thus while distributing the compound, press the trowel against the substrate at a small angle. Grassmarmo contains fine grains, thus while distributing the compound, hold the trowel at a small angle. Apply a layer of compound, covering the whole surface in movements towards the centre of the new layer. The work should be performed in stages until the whole surface is covered.

Clear the substrate initially with a putty knife. The coat should remain matt, thus you should always have some compound on the trowel during application and distribution. Apply overlapping layers of Grassmarmo, at the same time levelling the substrate until the whole surface is covered. Proceed to the next layer 20 minutes after commencing application of the first one (depending on the temperature and drying time)

Apply a small amount of Grassmarmo compound to a trowel. Press the trowel against the other trowel and pull them away several times to produce a sticking–out texture. Stamp skilfully spot by spot, applying the compound to the substrate to create a regular pattern over the whole surface. Change the way you hold the trowel frequently during application to avoid a symmetrical and uniform pattern. After a few minutes, smooth out the drying ridges. Add gloss before the compound dries. The work should be performed in stages.

Lumicca Incolore primes and preserves the substrate. Before commencing work, dilute 1:1, max. 1:1.5 with water and stir thoroughly. Apply with a wide brush and distribute with euromal evenly, according to the direction of previously created pattern. Remove excessive preservative using a cotton cloth, in particular from pits. The work should be performed in stages until the whole surface is covered.

Elegant and eco-friendly finish that creates an interesting, interfusing 3-dimensional matt and satin texture. A very noble decorative effect that complements all designs, makes them more vivid and adds a finishing touch. Creates an alkaline environment and facilitates easy removal of moisture from the walls in order to prevent fungi, moulds, and other micro-organisms from growing. What is important, it can be used directly to cement-lime plasters and machine-applied plaster. It does not require applying gypsum putty. Recommended for use in all kinds of interiors: private buildings, houses, flats, public facilities (hotels, shops, restaurants, offices, educational and cultural facilities, health care facilities, industry, etc.) and in any prestigious locations we want to provide with outstanding glamour and elegance, even those exposed to humidity and poor ventilation.