Prime absorbent (stable) substrate using MFA Classic concentrate diluted 1:4 with water. Apply primer with a wide brush, working it well into the substrate. Priming strengthens the substrate and improves adhesiveness and coverage of further coats.
Prime absorbent (weak) substrates and surfaces of old walls with MFA PLUS diluted max. 1:3 with water. Apply primer with a wide brush, working it well into the substrate. Deeply penetrating and binding the substrate, priming strengthens it, reduces excessive absorbency, and improves the coverage of further coats.

MFA WHITE – white primer, can be pigmented. Recommended before painting to make the substrate uniform, in particular when applying a new colour to walls. Intended for intense colours of low covering properties. Dilute with max. 100% of water, apply with a wide brush, working it well into the substrate. Can be applied using a roller without diluting as internal paint or priming base.

Polish painted surface slightly with fine sandpaper. Stir Velutti Magnapearl thoroughly. Apply the compound to a prepared substrate using an INOX trowel (large or medium). Distribute, applying layer by layer until the whole surface is covered.

Clear the substrate with a putty knife before applying the coat. Stir Velutti Magnapearl thoroughly. Using an INOX trowel (medium or large), apply a slightly excessive amount of the compound. Distribute, squeezing the excess from under the trowel to provide a uniform and symmetrical pattern. This method enables you to produce light reflections. Repeat the activity in cycles, combining the layers over the whole surface.

Using an INOX trowel (medium or large), apply a slightly excessive amount of the compound. Distribute, squeezing the excess from under the trowel to provide a uniform and symmetrical pattern. This method enables you to produce light reflections. Repeat the activity in cycles, combining the layers over the whole surface.

A decorative effect created by applying Velluti Magnapearl decorative compound to a smooth substrate painted with Murimal 200. The final effect provides beautiful light reflections with a golden or pearlescent afterglow, more uniform than when applied to Calce Grassello stucco. This gives an exclusive feeling to the interior. The intensity of the afterglow is visible due to the exposure of light and shade. Very elegant and practical due to its resistance to washing. The golden or pearlescent afterglow is selected for the finish based on the colour.